Bond It | Drive Alive Block Sealer
Bond It | Drive Alive Block Sealer
A ready-to-use, clear sealant for block paving, paths and drive ways. Features & Benefits:-Protects from water penetration, staining and dirt/grime build-up – Will enhance present colour and extend the lifespan of the treated surface – Advanced “hybrid” technology – Excellent abrasion and chemical resistance – Inhibits organic growth – Solvent-free – Facilitates easier cleaning – Improves water resistance and UV resistance – Contains fungicide which retards mould growth. Ready to use, and does not require diluting. We advise that you test this product on a small inconspicuous area prior to use to check compatibility. Stir well before use. Ensure that the surface is completely dry. Apply a single coat using either a brush, roller or squeegee, ensuring no pooling or ponding occurs. Allow 3-4 hours drying time before trafficking the area. Application temperature between 5ºC and 30ºC. Colder humid conditions will slow drying times.
Bond It | Drive Alive Colour Enhancer 5L
Bond It | Drive Alive Colour Enhancer 5L
A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Designed to enhance and expand the lifespan of coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. Features & Benefits:- Restores colour – Reduces water penetration, staining and dirt/grime build-up – UV stable formulation – Helps inhibit organic growth – Solvent-free formulation; low odour – Facilitates easier cleaning – Improves water resistance and UV resistance – Contains fungicide which retards mould growth. Ready to use and does not require diluting. Stir well before use and periodically during application. A test on a small inconspicuous area is recommended to determine the depth of colour required. Always use tubs from the same batch to guarantee colour matching. Apply using a brush or lambswool roller and do not over apply or allow puddling to occur. This product will dry in 1 to 2 hours on a dry sunny day; however, cold or humid conditions will slow drying times. Do not traffic for approximately 3-4 hours after application. Only to be used in conjunction with other Bond It Drive Alive products.
Bond It | High Strength Brick Acid 5L
Bond It | High Strength Brick Acid 5L
A super strength (16% hydrochloric acid) cleaner that will remove cement and mortar splashes from brickwork, paving, concrete floors and warehouses. For removing cement and mortar splashes, light oil stains and grease from brickwork, paving, tiles, earthenware and concrete. This cleaner should not interfere with the various types of concrete and stone (except limestone and marble) commonly encountered in the general building area. Efflorescence can also be removed by using this product diluted. Test a small area prior to application. Product should be diluted to recommended levels. Apply by brush and allow to stand for 10-15 minutes. Do not allow to dry out. Scrub with a stiff brush then rinse thoroughly with a hose pipe. Can be used undiluted for stubborn stains. Note: this product will attack limestone, marble, stainless steel and aluminium.
Bond It | LQ Waterseal 5L
Bond It | LQ Waterseal 5L
A premium waterseal designed to repel water from exterior masonry work which allows walls to breathe, reducing the risk of damage caused by water and frost. Used as a masonry water-proofer suitable for use on brick, stone and concrete. It protects against water and frost, providing a breathable coating which does not change the physical appearance of a building. A secondary benefit of the product is to repel water-borne dirt and resist fungal growth as well as help reducing heating costs, as energy is not wasted in drying out wet walls. Offers years of protection. Brush at a rate of 3m² per litre for porous stone and 5m² per litre for hard brick, allowing 6 hours to dry before applying a second coat. Always apply with a smooth action starting at the top and working your way down the wall. Care should be taken not to splash or mist cars, windows, painted surfaces, plants and ponds. Two coats are recommended for best results, however more coats can be applied. Apply by brush or non-atomising spray.
Bond It | Patio Blaster 5L
Bond It | Patio Blaster 5L
A concentrated disinfectant for the removal and prevention of green mould, lichens and algae on hard surfaces. For use on: patios, tarmac and asphalt driveways, fencing, decking, pathways, roofing, painted & glazed pots, garden furniture and ornaments, weatherboard, brickwork, masonry, York stone, concrete, pebbledash, garden sheds, greenhouses, conservatories, gravestones, gravel, PVC, caravans, tennis courts and other artificial play/sports surfaces. Features & Benefits:- Inhibits mould growth – Biodegradable – Anti-bacterial – Long lasting – No bleach or acids – No scrubbing or pressure washing. HSE Approved. HSE Approved: Certificate No 9830. A simple 3 step system – dilute, apply, leave to dry! Dilute with water for normal use. Apply to dry surfaces using a low pressure water spray or watering can fitted with a rose.
Squeegee 55cm (1.2m Handle Included)
Squeegee 55cm (1.2m Handle Included)
55cm Double heavy duty foam floor squeegee for use in moving large volumes of water, mud, debris, waste, scraps, slush or snow and flood clean-up.
- Offers clean-up for variety of surfaces and applications, from building cleanup to facility maintanance to flood damage. Great around the house for decks, patios and garage floors
- Use on coated and uncoated smooth concrete floors, asphalt, grouted & tiled floors and other smooth surfaces.
- Superior for spreading sealers and coatings
- Clamp style attachment for fixing a tapered wooden handle or similar.
Perfect for grouting porcelain and natural stone.
Concrete Sand
Concrete Sand
Washed Sharp sand is often referred to as Concrete sand or Grit sand. With its larger …
Prime Tec Slurry Primer Grey | 20kg
Prime Tec Slurry Primer Grey | 20kg
PrimeTec is an easy to use polymer enhanced primer specifically designed for use on external porcelain and all types of non polished natural stone.
It is essential to always prime Porcelain Slabs.
Due to the non absorbent nature of porcelain, non primed slabs will not form a mechanical bond to the bedding material, and are likely to rock or move, especially after a spell of sub zero winter weather.
Available in 15kg units (2×7.5kg units).
Mix in tub for less mess!
Everbuild 208 Powder Mortar Tone
Everbuild 208 Powder Mortar Tone
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of …
Everbuild 401 Brick and Patio Cleaner 5L
Everbuild 401 Brick and Patio Cleaner 5L
401 Brick & Patio Cleaner is a fast-acting acid-based formula (9.5% strength) that dissolves mortar and cement stains, ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, paving flags and earthenware.
Please note this product is only suitable for external applications.
- Acid-based – powerful cleaning action
- Water clean up
- Economical in use
- 1L (neat) will clean up approx. 10m² of surface stain
Everbuild 407 Mortar Stain Remover 5L
Everbuild 407 Mortar Stain Remover 5L
407 Mortar Stain Remover is a highly concentrated fast acting acid based formula (18% strength) which dissolves mortar and cement stains, ingrained dirt and most paints on mineral surfaces such as brick, render and concrete. Clean up after use with cold water.
- Acid based for powerful cleaning
- Cleans stains from brickwork, some natural stone, concrete and earthenware.
- Cleans stains from patios, and garage and factory floors.
Everbuild 404 Fungicidal Wash
Everbuild 404 Fungicidal Wash
404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc.
5 litre
