2400x95x95mm (88x88mm) Planed | Rounded Edge
2400x95x95mm (88x88mm) Planed | Rounded Edge
Nominal: 95x95mm Finished: 88x88mm
Available in: 2400mm lengths
Produced from kiln dried pine
Planed all round with eased four corners
High pressure treated to UC4 for longevity
Added resistance from rot and insect attack
Perfect for pergolas and high-end projects
Eased four edges for simpler handling
Bond It | Astro Pro Adhesive
Bond It | Astro Pro Adhesive
A tough, elastic hybrid seaming adhesive for the installation of artificial grass surfaces.
Features & Benefits:- Can be applied to wet surfaces – Solvent-free and odourless – Fast tack and rapid cure time – Non-shrinking and permanently elastic. A superior adhesive suitable for use inside and out, in all weather conditions. Has excellent bonding properties even on wet surfaces. Rapid cure time even at low temperatures. Remains fully elastic. Simple application; Ideal for maintenance and repair work.
Bond It | Drive Alive Block Sealer
Bond It | Drive Alive Block Sealer
A ready-to-use, clear sealant for block paving, paths and drive ways. Features & Benefits:-Protects from water penetration, staining and dirt/grime build-up – Will enhance present colour and extend the lifespan of the treated surface – Advanced “hybrid” technology – Excellent abrasion and chemical resistance – Inhibits organic growth – Solvent-free – Facilitates easier cleaning – Improves water resistance and UV resistance – Contains fungicide which retards mould growth. Ready to use, and does not require diluting. We advise that you test this product on a small inconspicuous area prior to use to check compatibility. Stir well before use. Ensure that the surface is completely dry. Apply a single coat using either a brush, roller or squeegee, ensuring no pooling or ponding occurs. Allow 3-4 hours drying time before trafficking the area. Application temperature between 5ºC and 30ºC. Colder humid conditions will slow drying times.
Bond It | Drive Alive Colour Enhancer 5L
Bond It | Drive Alive Colour Enhancer 5L
A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Designed to enhance and expand the lifespan of coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. Features & Benefits:- Restores colour – Reduces water penetration, staining and dirt/grime build-up – UV stable formulation – Helps inhibit organic growth – Solvent-free formulation; low odour – Facilitates easier cleaning – Improves water resistance and UV resistance – Contains fungicide which retards mould growth. Ready to use and does not require diluting. Stir well before use and periodically during application. A test on a small inconspicuous area is recommended to determine the depth of colour required. Always use tubs from the same batch to guarantee colour matching. Apply using a brush or lambswool roller and do not over apply or allow puddling to occur. This product will dry in 1 to 2 hours on a dry sunny day; however, cold or humid conditions will slow drying times. Do not traffic for approximately 3-4 hours after application. Only to be used in conjunction with other Bond It Drive Alive products.
Bond It | High Strength Brick Acid 5L
Bond It | High Strength Brick Acid 5L
A super strength (16% hydrochloric acid) cleaner that will remove cement and mortar splashes from brickwork, paving, concrete floors and warehouses. For removing cement and mortar splashes, light oil stains and grease from brickwork, paving, tiles, earthenware and concrete. This cleaner should not interfere with the various types of concrete and stone (except limestone and marble) commonly encountered in the general building area. Efflorescence can also be removed by using this product diluted. Test a small area prior to application. Product should be diluted to recommended levels. Apply by brush and allow to stand for 10-15 minutes. Do not allow to dry out. Scrub with a stiff brush then rinse thoroughly with a hose pipe. Can be used undiluted for stubborn stains. Note: this product will attack limestone, marble, stainless steel and aluminium.
Bond It | LQ Waterseal 5L
Bond It | LQ Waterseal 5L
A premium waterseal designed to repel water from exterior masonry work which allows walls to breathe, reducing the risk of damage caused by water and frost. Used as a masonry water-proofer suitable for use on brick, stone and concrete. It protects against water and frost, providing a breathable coating which does not change the physical appearance of a building. A secondary benefit of the product is to repel water-borne dirt and resist fungal growth as well as help reducing heating costs, as energy is not wasted in drying out wet walls. Offers years of protection. Brush at a rate of 3m² per litre for porous stone and 5m² per litre for hard brick, allowing 6 hours to dry before applying a second coat. Always apply with a smooth action starting at the top and working your way down the wall. Care should be taken not to splash or mist cars, windows, painted surfaces, plants and ponds. Two coats are recommended for best results, however more coats can be applied. Apply by brush or non-atomising spray.
Bond It | Patio Blaster 5L
Bond It | Patio Blaster 5L
A concentrated disinfectant for the removal and prevention of green mould, lichens and algae on hard surfaces. For use on: patios, tarmac and asphalt driveways, fencing, decking, pathways, roofing, painted & glazed pots, garden furniture and ornaments, weatherboard, brickwork, masonry, York stone, concrete, pebbledash, garden sheds, greenhouses, conservatories, gravestones, gravel, PVC, caravans, tennis courts and other artificial play/sports surfaces. Features & Benefits:- Inhibits mould growth – Biodegradable – Anti-bacterial – Long lasting – No bleach or acids – No scrubbing or pressure washing. HSE Approved. HSE Approved: Certificate No 9830. A simple 3 step system – dilute, apply, leave to dry! Dilute with water for normal use. Apply to dry surfaces using a low pressure water spray or watering can fitted with a rose.
Bond It | Tarmac Restorer 4L
Bond It | Tarmac Restorer 4L
A ready-to-use, black, water-based coating for tarmac drives and pathways, designed to restore colour, reduce water penetration, and protect from dirt/grime build-up. Features & Benefits:- Restores tarmac colour – Helps protect from water damage – Reduces dirt/grime build-up – Inhibits organic growth – Solvent-free. Ready-to-use, does not require diluting. Stir thoroughly before using and ensure the surface is completely dry prior to application. Apply using a brush, roller or squeegee, ensuring that no pooling or ponding occurs. Only to be used in conjunction with other Bond It Drive Alive products.
Children’s Play House | Clearance
Faithfull Black & White Fiberglass Mallet 24oz
Faithfull Black & White Fiberglass Mallet 24oz
This Faithfull Fibreglass Mallet has the following specifications:
Colour: Black/White.
Face Size: 60 x 115mm.
Weight: 24oz.
Handle Size: 295mm.
Faithfull Cam Buckle Tie Downs 5m x 25mm 4pcs
Faithfull Cam Buckle Tie Downs 5m x 25mm 4pcs
Specification:
Length: 5m
Width: 25mm
Breaking Strain: 200kg/200 daN
Max. Working Load: 100kg/100 daN
Faithfull Countryman Folding Pruning Saw
