Oxford T&G Gate
Oxford T&G Gate
The Oxford Straight-top and Arch-top gate offers a simple yet elegant look for any entrance. With …
Norfolk T&G Gate
Norfolk T&G Gate
The Norfolk makes an excellent gate, full of character, epitomised in its tongue and groove boarding …
Windsor Tall T&G Single Gate
Windsor Tall T&G Single Gate
• Windsor 1800mm high Wooden Garden Gate. • The timber is responsibly sourced from managed Scandinavian …
Essex Arch Top Double Driveway Gates
Essex Arch Top Double Driveway Gates
***Driveway gates are made to order, currently the lead time is approximately 2-4 weeks***
The Kent Arch-top makes an excellent double gate, full of character, epitomised in its arched design and the stylish heels at either end. There is also a double heel where the two gates meet at the high point of the gates.
With a sturdy, mortice and tenon frame and tanalising treatment as standard, these strong and attractive gates make a fitting entrance for any driveway. They can also be used for automated front entrances with a suitable automation kit and a strengthened bottom rail. The gates are manufactured from Swedish redwood to the customer’s specific requirements. The gate can be treated by the customer with Sadolin or similar (unfortunately we are not able to offer this treatment ourselves).
These gates are 2.1m (7ft) high and are available in a range of of widths, from 1.8m (6ft) to 3.6m (12ft)
Jointing – Mortice and Tenon
Automation? With strengthened bottom rail
Finishes and preservatives Tanalised.
We strongly advise you use 24in Hook and Band or Adjustable Hook and Band hinges with this gate. Using T-hinges adds unnecessary strain to the gate and will shorten its lifespan dramatically.
We recommend the following size posts:
10′ – 12′ gates = 8″ x 8″ post
8′ – 9′ gates = 7″ x 7″ post
6′ – 7′ gates = 6″ x 6″ post
Kent Arch Top Double Driveway Gates
Kent Arch Top Double Driveway Gates
***Driveway gates are made to order, currently the lead time is approximately 2-4 weeks***
The Kent Arch-top makes an excellent double gate, full of character, epitomised in its arched design and the stylish heels at either end. There is also a double heel where the two gates meet at the high point of the gates.
With a sturdy, mortice and tenon frame and tanalising treatment as standard, these strong and attractive gates make a fitting entrance for any driveway. They can also be used for automated front entrances with a suitable automation kit and a strengthened bottom rail. The gates are manufactured from Swedish redwood to the customer’s specific requirements. The gate can be treated by the customer with Sadolin or similar (unfortunately we are not able to offer this treatment ourselves).
These gates are 2.1m (7ft) high and are available in a range of of widths, from 1.8m (6ft) to 3.6m (12ft)
Jointing – Mortice and Tenon
Automation? With strengthened bottom rail
Finishes and preservatives Tanalised.
We strongly advise you use 24in Hook and Band or Adjustable Hook and Band hinges with this gate. Using T-hinges adds unnecessary strain to the gate and will shorten its lifespan dramatically.
We recommend the following size posts:
10′ – 12′ gates = 8″ x 8″ post
8′ – 9′ gates = 7″ x 7″ post
6′ – 7′ gates = 6″ x 6″ post
Norfolk Double Driveway Gates
Norfolk Double Driveway Gates
***Driveway gates are made to order, currently the lead time is approximately 2-4 weeks***
The Norfolk makes an excellent gate, full of character, epitomised in its tongue and groove boarding and the stylish heels at either end.
Sizing – 1.8m high and 1.8m to 3.6m wide.
With a strong, mortice and tenon frame and tanalising treatment as standard, this sturdy and attractive gate makes a great entrance gate. The gate is manufactured from Swedish redwood to the customer’s specific requirements.
Jointing – Mortice and Tenon
Finishes and preservatives – Tanalised
We strongly advise you use Hook and Band or Adjustable Hook and Band hinges with this gate.
Using T-hinges adds unnecessary strain to the gate and will shorten its lifespan dramatically.
We recommend the following size Gate posts:
10′ and over gates = 8″ x 8″ post
8′ – 9′ gates = 7″ x 7″ post
6′ – 7′ gates = 6″ x 6″ post
Ranch Gate | Rough Sawn
Ranch Gate | Rough Sawn
***Gates are made to order with approximately a 7-10 day lead time***
Our traditionally styled pressure treated ranch gates are handcrafted and built for strength and longevity using strong mortice and tendon joints. These gates are extremely versatile, weather you are after a timber gate for paddocks, fields, stables, driveways or as an agricultural gate this is a perfect option.
Made from Swedish redwood with a traditional rough sawn finish, as with all softwood, some splitting or cracks may occur, especially in periods of hot weather.
These gates can also be made to come as a pair, as seen in photo two. Please ring to order a pair of ranch gates
Field Gate | Rough Sawn
Field Gate | Rough Sawn
***Gates are made to order with approximately a 7-10 day lead time***
Our traditionally styled pressure treated field gates are handcrafted in Shropshire and built for strength and longevity using strong mortice and tendon joints. These gates are extremely versatile, weather you are after a timber gate for paddocks, fields, stables, driveways or as an agricultural gate this is a perfect option.
Made from Swedish redwood with comes in traditional rough sawn. As with all softwood, some splitting or cracks may occur, especially in periods of hot weather.
Bahco 244P-22-U7-HP Barracuda Handsaw 550mm (22in) 7 TPI
Bahco 244P-22-U7-HP Barracuda Handsaw 550mm (22in) 7 TPI
The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF.
The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.
Spear & Jackson B9822 Predator Universal Hand Saw 550mm (22″)
Spear & Jackson B9822 Predator Universal Hand Saw 550mm (22″)
Create fast cuts with The Spear & Jackson B9822 Predator Fast Cut Saw
The Spear & Jackson B9822 is a fast cutting saw featuring cross ground, hard pointed teeth that are expertly heat-treated to last longer than the best of the rest. The Suregrip handle has a soft feel ergonomic grip and incorporates a handy 45 and 90-degree angle guide for a precision cut. The Predator has a rigid blade that minimises vibration and ‘whip’. This saw is ideal for use on a variety of materials such as timber, hardwood, chipboard and MDF.
Irwin Jack Plus 880 UN Universal Panel Saw | 8 TPI
Irwin Jack Plus 880 UN Universal Panel Saw | 8 TPI
The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4x the added protection than conventional anti-rust agents.
The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.
4 Stroke Engine Oil 500ml
4 Stroke Engine Oil 500ml
ALM 4-Stroke lawnmower oil is a premium quality 4-stroke oil.
It is blended from the finest mineral oil additives which ensures the thermal stability, anti-wear, engine cleanliness and corrosion protection properties demanded of a modern 4-stroke oil.
It is suitable for ALL 4-stroke lawnmowers and mobile 4-stroke petrol and diesel engines using SAE30.
Meets the following performance standards: API SF, API CC.
Blended and bottled in the UK.
Size: 500ml.
